 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MASWSS0200 GaAs SP3T 2.7 V CDMA-GPS Switch DC - 2.5 GHz Features * * * * * * * * * * Balanced (symmetrical) RF Ports Low Cross Modulation Low Insertion Loss: 0.55 dB at 1 GHz High Isolation: 21 dB at 2 GHz 0.5 micron GaAs PHEMT Process Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MASWSS0060 Rev. V1 Functional Schematic 100 pF GND ANT Pin 12 Pin 1 V1 RF1 GND V3 RF3 100 pF 100 pF Description M/A-COM's MASWSS0200 is an industry leading GaAs PHEMT MMIC single pole three throw (SP3T) CDMA-GPS switch in a lead-free 3 mm 12-lead PQFN package. The MASWSS0200 is uniquely configured to enable switching from a common antenna port to CDMA cellular, CDMA PCS, or GPS ports. The design is symmetric and has been fully optimized for excellent cross modulation performance in all three paths while still maintaining excellent insertion loss and isolation. Note that since the design is symmetric, the user can assign CDMA cellular, CDMA PCS and GPS to ports RF1, RF2 or RF3 at his or her discretion. The MASWSS0200 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. GND GND GND RF2 Pin Configuration Pin No. 1 2 3 4 5 6 7 8 Function V1 RF1 GND GND RF2 V2 GND RF3 V3 GND ANT GND GND (paddle) 100 pF V2 Description Control 1 RF Port 1 Ground Ground RF Port 2 Control 2 RF Ground RF Port 3 Control 3 RF Ground Antenna Port RF Ground RF Ground Ordering Information Part Number MASWSS0200TR-3000 MASWSS0200SMB Package 3000 piece reel Sample on Evaluation Board 9 10 11 12 13 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0200 GaAs SP3T 2.7 V CDMA-GPS Switch DC - 2.5 GHz Electrical Specifications: TA = 25C, Z0 = 50 1 Parameter Insertion Loss (All Paths) Isolation 2 Rev. V1 Test Conditions 1.0 GHz 1.5 GHz 2.0 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 2.5 GHz DC - 2.5 GHz Two Tone, +22 dBm/tone, 1 MHz Spacing, 820 MHz Two Tone, +22 dBm/tone, 1 MHz Spacing, 1880 MHz For Cell Band: Two-tone signal input: Tx1 = +22 dBm @ 820 MHz, Tx2 = +22 dBm @ 821 MHz, RX interfere = -23 dBm @ 869 MHz For PCS Band: Two-tone signal input: Tx1 = +18 dBm @ 1880 MHz, Tx2 = +18 dBm @ 1881 MHz, RX interfere = -23 dBm @ 1960 MHz Units dB dB dB dB dB dB dB dBm dBm dBm Min. -- -- -- 23 18 16 -- -- -- -- Typ. 0.55 0.60 0.70 27 21 20 20 62 61 -101 Max. 0.70 0.75 0.90 -- -- -- -- -- -- -- Return Loss (All RF ports) IP3 Cross Modulation dBm -- -102 -- P.1dB Trise, Tfall Ton, Toff Transients Control Current Vc = 0 V / 2.7 V, 1 GHz 10% to 90% RF, 90% to 10% RF, 900 MHz 50% control to 90% RF, and 50% control to 10% RF, 900 MHz In Band Vc = 0 V / 2.7 V dBm S S mV A -- -- -- -- -- 36 0.06 0.09 70 -- -- -- -- -- 30 1. External DC blocking capacitors are required on all RF ports. 2. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 100 pF for 0.5 - 2.5 GHz. Absolute Maximum Ratings 3,4 Parameter Input Power (0.5 - 2.5 GHz, 2.7 V Control) Control Voltage Operating Temperature Storage Temperature Truth Table 5,6 V1 1 0 Absolute Maximum +36 dBm 8.5 volts -40 C to +85 C -65 C to +150 C V2 0 1 0 V3 0 0 1 ANT-RF1 ANT-RF2 ANT-RF3 On Off Off Off On Off Off Off On 0 5. 6. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. Differential voltage, V (state 1) -V (state 0) must be 2.6 V minimum and must not exceed 8.5 V. 0 = -5 V to 2.4 V, 1 = -2.4 V to 5 V. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0200 GaAs SP3T 2.7 V CDMA-GPS Switch DC - 2.5 GHz Typical Performance Curves @ +25C VSWR 1.5 Rev. V1 Isolation 35 RF1-RF2 RF2-RF1 RF3-RF2 1.4 30 1.3 25 1.2 20 1.1 1.0 0.5 1.0 1.5 2.0 2.5 3.0 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Insertion Loss 1.0 RF1 RF2 RF3 Qualification Qualified to M/A-COM specification REL-201, Process Flow -2. 0.8 0.6 Handling Procedures Please observe the following precautions to avoid damage: 0.4 0.2 Static Sensitivity 1.0 1.5 2.0 2.5 3.0 0.0 0.5 Frequency (GHz) Lead-Free 3 mm 12-Lead PQFN Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MASWSS0200
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |